Unior Transmission Bracket Control Bicycle Tool 1602
$98.89
Sale price
$98.89
Regular price
Skip to product information
Unior Transmission Bracket Control Bicycle Tool 1602
$98.89
Sale price
$98.89
Regular price
- material: special tool steel, the pipe is made of construction steel
- Transmission bracket along with the rear transmission, threaded on it, must be parallel to the rear gear, which is the basis for smooth running of the chain and for a fast, efficient shifting.
- If the bicycle falls on the right side, damage to the rear transmission and deformations of the transmission bracket often occur. This causes the loss of the transmission bracket parallelism, which hinders proper functioning of gears.
- When performing repair work, first the rear wheel must be centered because an alligned rear wheel is the basis for the adjustment of the transmission bracket.
- The tool is easy to use and very precise. It is used to check the parallelism between the transmission bracket and the wheel, and to align the bracket if the parallelism is not reached.
- How to use the tool: Mount the control to the transmission bracket. Move the slider along with the measuring gauge towards the wheel rim and position it in such a way that the gauge only lightly touches the wheel rim. Then fix the measuring gauge by tightening the screw on the top of the slider. Perform the check by moving the bracket control to different positions on the wheel rim. If the transmission bracket is parallel to the wheel, the measuring gauge touches the wheel rim lightly on all positions. If the stick moves away from the rim or comes extremely close to it, the bracket has to be aligned. And since our bracket control is strong, the transmission bracket may be aligned by means of the fixed control. Repeat the procedure until the measuring gauge lightly touches the whole rim and then parallelism is achieved again.